DIN Rail 10/100/1000M Ethernet Fiber Media Converter

The HFB Series 10/100/1000M Auto-Sensing Ethernet Fiber Optic Transceiver is designed using advanced fiber optic technology. This series transmit and receive 10/100/1000 Mbps (no adjustment is required) data over two single-mode optical fibers, extending the Ethernet transmission distance from its normal few hundred meters to 0-120 kilometers. By using optical fiber as transmission media, this series continue to perform its secured, high-speed and long-distance communication even under the adverse condition such as lighting, power surge and electromagnetic interference; Substantial saving on lighting and power surge protection equipments if copper wires were used.

ETHERNET

Supporting standards IEEE802.3 10Base-T, 100Base-T, 1000Base-T

Data Rate 10/100/1000Mbps auto-sensing, Full Duplex or Half Duplex

Physical Interface RJ45, DCE interface

OPTICAL

Number of Fibers :2

Wavelength: 1310nm

Fiber Type:  9/125μ m(SM)

Distance:  0 ~ 25km, 0~40km, 0~60km, 0-80km

Connector Type: ST/FC/SC

GENERAL

Operating Temperature:                   -30 ~ 70C/ -30 ~ +158F

Relative Humidity:       0 ~ 95% non-condensing

Mean Time Between Failure (MTBF): > 600, 000hrs

Power Supply Adaptors:               AC 220V 110v or DC+110V, +5V, +12V, +24V, +48V Option

Enclosure Color:                     Silver

Dimensions ( L× W× H ):            25(L)× 110(W)× 36(H)DIN Rail