CAN-Open Fiber Optic Converter
Descriptions:
The HFD-FO-OPE CAN Open series products provide an optical point-to-point or bus network connection for CAN Open data interfaces on one or two, multimode or singlemode optical fibers. The CAN Open Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and Device Net. And are transparent to all high level protocols.
This series is available in either wall mount, DIN rail or 3U chassis card configurations.
Product Features
Up to 1MB data rate
Multimode and singlemode
Single fiber solution
Wall mount, rack or chassis configurations
Product Features
Up to 1Mbps data rate
Multimode and singlemode
Single fiber solution,Dual power supplies
|
Data
|
|
Data Formats
|
CAN1.0 ,CAN2.0 , ISO-11989
|
|
CAN Data Rate
|
0 to 1Mbps
|
|
Bit Error Rate
|
<1 x 10-12
|
|
Connectors
|
|
Data
|
Screw Block Terminal
|
|
Fiber
|
ST, SC or FC (ST fitted as standard)
|
|
Environmental
|
|
Operating Temperat ure
|
- 3 0 C--- +70 C
|
|
Storage Temperature
|
- 40 C--- +85 C
|
|
Operating Humidity
|
0- 95%
|
|
MTBF
|
>100,000 Hours
|
|
Optical
|
|
Fiber
|
Multi mode or single mode
|
|
Wavelength
|
MM: 850nm, SM: 1310nm
|
|
Number of fibers
|
2 or 1
|
|
POWER
|
|
Power Input
|
AC 220V 110v or DC+110V +5V +12V +24V +48V Option
|
|
Mechanical
|
|
Dimensions
|
43(W)×88.5(D)×124.5(H)mm DIN Rail
|
Ordering Information:
|
CANOpen Fiber Optic Converter
